These handy converters allow you to wear any pin as a pendant! Each converter has a large sized bail that will fit most necklaces. Open your pin, insert the pin stem into the hollow tube and close. Now you can wear your favorite pin on a necklace! We are stocking these in several metal finishes as well as vertical and horizontal converters. Pin stems must be hinged so these do not work with tie-tacks. Horizontal converters also work best on pins with horizontal pinstems that are offset and not directly centered so most of the weight is towards the bottom. The hole in these converters is large enough to fit thicker than normal pinstems up to 2 mm thick. Price is per converter.
*Silver plated vertical holders will be restocked shortly.*
Please note tube lengths. If you would like to use these for pins with pin stems much longer than the length of the converter tube, you may want to add silicone tubing or bumpers (AKA earring keepers) on both sides to keep the converter centered on the pin stem. These are sold at most craft stores. We also have flower shaped keepers here
. If you have a thicker gauged pinstem we recommend these pin keepers
which are larger sized.
Horizontal = 21 mm high loop, 13 mm wide holding tube
Vertical = - 22 mm high loop, 12 mm high holding tube
Brushed gold horizontal (good for brass or antiqued gold)
Silver plate horizontal
Gold plate horizontal
White plate horizontal
Dark gunmetal horizontal
Silver plate vertical
Gold plate vertical
Antiqued brass vertical